LKS-338 Stainless Steel Cable Tie Cutoff Tool with Automatic Cutoff and Adjustable Bunding Pressure

• For Stainless steel cable ties
• Fasten and automatically cut-off for a clean finish, with adjustable bunding pressure
• Stainless steel cable tie:Width up to 7.9 mm (0.03"), thickness up to 0.3 mm (0.01")
• Size:178×140×29mm
• Weight:0.56kg.

1. Thread the tail into the head of the cable tie.
2. Adjust the wheel to the required tension for the cable tie.
3. Place the tail and shaft of the cable tie into the solt at the tip of the gun barrel.
4. Push the tie as far back onto the gun base as possible. The head must be touching the gun tip outside the tool.
5. Squeeze the handle of the gun to pull the tie through the head making sure the head of the tie is always touching the tip of the gun.
6. Keep pulling the handle until the tie is securely fastened around the desired object.
7. The gun will automatically cut the excess tie off when it reaches maximum tension.

Turn to Home Page

Welcome to visit our website:www.cncabletie.com